Nokia IP40 - Satellite Unlimited - Security Appliance, User Manual

Page: 185 / 244

Nokia IP40 Tele to IP40 Satellite X (VPN Client to Gateway)
Nokia IP40 Security Platform User’s Guide v1.1 185
5. Do one of the following:
„
Select Remote Access VPN to establish remote access from your VPN client to a VPN
server or gateway.
„
Select site-to-site VPN to create a permanent bidirectional connection to another
gateway.
6. Click Next.
The VPN Gateway Address dialog box appears.
7. Enter the IP address of the VPN gateway to connect, as given to you by the network
administrator.
8. Click Next.
9. The VPN Network Configuration dialog box appears. See “Setting Up Nokia IP40 as a VPN
Server” on page 163 to proceed.
The Reports > VPN tunnels page allows you to view the active VPN tunnels with the Phase-
I negotiation used.
In order to see the Phase-II negotiation refer to Reports > Active Connections and point the
mouse on the lock symbol of the FTP, HTTPS, SSH traffic passing through the VPN tunnel.
Nokia IP40 Tele to IP40 Satellite X
(VPN Client to Gateway)
Nokia IP40 Tele 8 functions in VPN client mode, in which connection is initiated only by the
VPN client.
Nokia IP40 Tele 8 uses only a manual mode VPN connection. To select the VPN gateway to
which you want to establish a VPN connection, go to http://my.vpn.
Figure 7 IP40 Tele 8 as VPN Client
If the VPN client is enabled, the IP40 GUI main menu includes a VPN menu option. In addition,
the Reports pages include an additional VPN Tunnels submenu that allows you to view the
active VPN tunnels.
Non Routable IPs
Network 1
Non Routable IPs
Network 2
Initiate VPN Session/ Tunnel
IP40 Tele
IP40 Satellite