manualshive.com logo in svg

Nokia IP40 - Satellite Unlimited - Security Appliance, User Manual

Share
Download
Nokia IP40 - Satellite Unlimited - Security Appliance User Manual Download Page 109

Nokia IP40 Security Platform User’s Guide v1.1

109

Deleting Users

You can delete users with IP40 Satellite X only.

Note

The 

admin

 user cannot be deleted.

To delete a user 
1.

Click Users on the main menu.
The Users page appears. 

2.

Click the Erase icon in the user’s row that you want to delete. 
A confirmation message appears.

3.

Click OK.
The user is deleted.

Setting Up Remote VPN Access for Users

You can set up VPN access for users with IP40 Satellite X only. 
If you are using the IP40 as a VPN server, you can allow users to access it remotely through their 
VPN clients (a Check Point SecureClient, Check Point SecuRemote, IP40 Tele 8, or another 
IP40 Satellite X). 

To set up remote VPN access for a user
1.

Enable your VPN server by using the procedure in 

“To set up your IP40 as a VPN server” 

on 

page 163.

2.

Add the user to the system by using the procedure in 

“Adding Users” 

on page 107.

You must select the VPN Remote Access option.

VPN Remote 
Access

Allows the user to connect to this IP40 by 
using their VPN client. For further information 
about setting up VPN remote access, see 

Chapter 14, “Working with VPNs.”

This option is available in IP40 Satellite X 
configuration only. 

Web Filtering 
Override

Allows the user to override Web filtering.
This option only appears if the Web filtering 
service is defined. 

Table 20  Edit User Page Fields

Field

Action

Summary of Contents for IP40 - Satellite Unlimited - Security Appliance





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands