manualshive.com logo in svg

Nokia IP40 - Satellite Unlimited - Security Appliance, User Manual

Share
Download
Nokia IP40 - Satellite Unlimited - Security Appliance User Manual Download Page 184

14

 Working with VPNs

184

Nokia IP40 Security Platform User’s Guide v1.1

Nokia IP40 Site-to-Site VPNs support

The following sections describe about site-to-site VPNs, and the modes they support.

Adding VPN Sites by Using Nokia IP40 Satellite X

You can define each VPN site according to the function you want IP40 Satellite X to perform 
when connecting to the site:

„

VPN Client

—define the VPN site as a remote access VPN site using the following 

procedure.

„

VPN Gateway

—do the following:

„

Define the second VPN site as a site-to-site VPN gateway by using the following 
procedure.

„

Define the first VPN site as a site-to-site VPN gateway.

To add or edit VPN sites by using Nokia IP40 Satellite X
1.

Click VPN on the main menu. 

2.

The VPN Server page appears

3.

.In the VPN submenu, click VPN Sites.
The VPN Sites page appears with a list of VPN sites.

4.

Do either of the following:

„

To add a VPN site, click New Site.

„

To edit a VPN site, click Edit in the desired VPN site row.

The IP40 VPN Site Wizard opens, with the Welcome to the VPN Site Wizard dialog box 
displayed.

Summary of Contents for IP40 - Satellite Unlimited - Security Appliance





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands