Nokia IP30 - Satellite Plus - Security Appliance User Manual Download Page 81

Page: 81 / 164

Managing Your Network

Nokia IP30 User Guide

Note

The On/Off slider and Protocols area on this page are read-only. Contact
your Service Center to change these settings.

If the service is enabled, the On/Off lever is set to On.

Click Snooze.

Anti virus scanning is snoozed for all internal network
computers.

The Snooze button changes to Resume.

The Anti virus Off popup window opens.

Note

Closing the E-mail Anti Virus Off popup window does not cause the Anti
Virus service to resume.

To re-enable the service, click Resume, either in the popup
window, or on the Anti virus page.

The service is re enabled for all internal network computers.

The Resume button changes to Snooze.

If the Anti virus Off popup window was open, it closes.

Automatic and Manual Updates

If you are subscribed to software updates, you can check for new
security and software updates.

Summary of Contents for IP30 - Satellite Plus - Security Appliance





































































































































































Search results

Summary of Contents for IP30 - Satellite Plus - Security Appliance

Reviews:

Related manuals for IP30 - Satellite Plus - Security Appliance

Brands by name

Popular brands

Nokia IP30 - Satellite Plus - Security Appliance, User Manual

Search results

Summary of Contents for IP30 - Satellite Plus - Security Appliance

Reviews:

Related manuals for IP30 - Satellite Plus - Security Appliance

Brands by name

Popular brands