background image

3

  Configuring the IP30

62

Nokia IP30 User Guide

Note

This feature is applicable for IP30 Tele and Satellite.

A VPN tunnel is created whenever your computer attempts to 
communicate with a computer at the VPN site, after you have 
logged on to the site. When you log off, all open tunnels connecting 
to a VPN site are closed.
VPN tunnels are created and closed as follows:

„

Remote Access VPN sites configured for automatic login: 
A tunnel is created whenever your computer attempts to 
communicate with a computer at the VPN site. The tunnel is 
closed when not in use.

Note

Although the VPN tunnel is automatically closed, the site remains open, and 
if you attempt to communicate with the site, the tunnel is re established.

„

Remote Access VPN sites configured for site-to-site VPN 
gateways:
A tunnel is created whenever your computer attempts to 
communicate with a computer at the VPN site. The tunnel is 
closed when not in use.

„

Remote Access VPN sites configured for Manual Login: 
A tunnel is created whenever your computer attempts to 
communicate with a computer at the VPN site, after you have 
manually logged on to the site. All open tunnels connecting to 
the site are closed when you manually log off.

To view VPN tunnels

1.

Click Reports.
The Event Log page appears.

Summary of Contents for IP30 - Satellite Plus - Security Appliance





































































































































































Reviews: