Replacing or Upgrading Memory
IP1220 and IP1260 Security Platforms Installation Guide
99
Replacing or Upgrading Memory
The Nokia IP1200 Series appliance has four dual inline memory-module (DIMM) sockets. This
section describes how to upgrade or replace the memory by using a Nokia-approved memory
upgrade kit.
The IP1200 Series appliances come with different memory configurations. Contact Nokia
customer support for more information on the supported memory configurations.
Nokia products only support memory kits purchased from Nokia or Nokia-approved resellers.
For further information, contact the appropriate Nokia customer support site listed in
“Nokia
Contact Information”
on page 3.
The DIMM sockets are located on the left rear of the IP1200 Series mother board, as you look at
the appliance from the front, as
Figure 23
shows.
Figure 23 DIMM Socket Locations
Note
You must install DIMMs in pairs starting from the left. Insert a pair of DIMMS into adjacent
slots J5/J6 and/or J7/J8, otherwise the DIMMS do not work. You can also use all four slots at
one time.
Before You Begin
To upgrade or replace your Nokia IP1200 Series appliance memory, you need:
Physical access to the appliance
Nokia memory upgrade kit and accompanying documentation
Access to the appliance by using Nokia Network Voyager or Lynx
00325.2
DIMM sockets
All manuals and user guides at all-guides.com