Nokia 7368 ISAM CPE Product Manual Download Page 16

Page: 16 / 108

ANSI safety guidelines

7368 ISAM CPE A-020W-A Product Guide

3FE-47511-AAAA-TCZZA

Issue: 01

The following is an example of the Caution box.

The Caution box indicates that the described activity or situation may, or will, cause

service interruption.

Do not proceed beyond a caution until the indicated conditions are fully understood

and met.

The following is an example of the Note box.

The Note box provides information that assists the personnel working with A-020W-A

CPE equipment. It does not provide safety-related instructions.

2.1.2

Safety-related labels

The A-020W-A CPE equipment is labeled with specific safety compliance

information and instructions that are related to a variant of the A-020W-A. Observe

the instructions on the safety labels.

Table

provides examples of the text in the various A-020W-A CPE safety labels.

Table 1

Safety labels

Figure

shows a sample safety label for the A-020W-A CPE, located on the base of

the unit.

Caution 1 —

Possibility of service interruption.

Caution 2 —

Service interruption.

Note —

Information of special interest.

Label text

Description

ETL compliance

Communication service equipment US listed.

ESD warning

Caution: This assembly contains electrostatic sensitive device.

FCC standards compliance

Tested to comply with FCC standards for home or office use.

Release 05.08.01 | June 2018 | Edition 01

Summary of Contents for 7368 ISAM CPE












































































































Search results

Summary of Contents for 7368 ISAM CPE

Reviews:

Related manuals for 7368 ISAM CPE

Brands by name

Popular brands

Nokia 7368 ISAM CPE, Product Manual

Search results

Summary of Contents for 7368 ISAM CPE

Reviews:

Related manuals for 7368 ISAM CPE

Brands by name

Popular brands