Nokia 7368 ISAM CPE Product Manual Download Page 24

Page: 24 / 108

ETSI safety guidelines

7368 ISAM CPE A-020W-A Product Guide

3FE-47511-AAAA-TCZZA

Issue: 01

3.2.2

Energy-related products standby and off modes
compliance

Hereby, Nokia declares that the A-020W-A CPE devices are in compliance with the

essential requirements and other relevant provisions of Directive 2009/125/EC

together with Commission Regulation (EC) No 1275/2008 and Commission

Regulation (EC) No 801/2013.

The A-020W-A CPE devices qualify as high network availability (HiNA) equipment.

Since the main purpose of A-020W-A devices is to provide network functionality with

HiNA 7 days /24 hours, the modes Off/Standby, Power Management, and Networked

Standby are inappropriate.

For information about the type and number of network ports, see

“A-020W-A

interfaces and interface capacity”

in chapter

For information about power consumption, see

“A-020W-A detailed specifications”

chapter

3.2.3

EMC and RED compliance

The A-020W-A CPE equipment complies with the following EMC, EMI, and ESD

requirements:

•

EN 300-386: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):

Telecommunications Network Equipment; Electromagnetic Compatibility (EMC)

requirements; Electrostatic Discharge (ESD) requirements

•

European Council Directive 2014/30/EU

•

European Council Directive 2014/53/EU

•

EN300328: Wide band transmission systems; data transmission equipment

operating in the 2.4 GHz ISM band using wide band modulation techniques

•

EN301893: 5 GHz RLAN

•

EN50385: Compliance of base station equipment with a radio frequency of

electromagnetic field exposure limits (110MHz-100GHz)

3.2.4

Equipment safety standard compliance

The A-020W-A CPE equipment complies with the requirements of EN 62368-1,

Safety of Information Technology Equipment for use in a restricted location.

Release 05.08.01 | June 2018 | Edition 01

Summary of Contents for 7368 ISAM CPE












































































































Search results

Summary of Contents for 7368 ISAM CPE

Reviews:

Related manuals for 7368 ISAM CPE

Brands by name

Popular brands

Nokia 7368 ISAM CPE, Product Manual

Search results

Summary of Contents for 7368 ISAM CPE

Reviews:

Related manuals for 7368 ISAM CPE

Brands by name

Popular brands