nokia
C
ONNECTING
P
EOPLE
PAGE 13 (23)
Approved 3.0
CMO Operations & Logistics
DJk
WW Service Solutions & Development
Bochum / Germany
CONFIDENTIAL
24.01.2005
Remove the C-Cover.
Place the SRT-6 between C-Cover and UI-Board. Press
the UI-Board as shown in step 1 in the picture above.
Than lift the UI-Board with the opening tool carefully.
Remove UI-Board…
…and Metal Frame. Protect the LCD with a film again.
Use SRT-6 to open the LCD connector. Take care about
components on the Engine Module during this
procedure.
Take away the LCD...
…and the Engine Module.
To prevent damages of spring contacts always use a C-
Cover or soldering jig when removing VGA Camera.
Service Manual 6230/i Level 1&2
Copyright © 2004-2005 Nokia Corporation. All rights reserved.
