Nokia 6090 AT Command Set
48
+CSMS Select Message Service
This commands selects the messaging service and returns the type of messages
supported. Supported service is specified by GSM 03.40 and 03.41 (service value 0).
Main difference between 0 and 1 is that when =1 +CNMA acknowledgement is
required to most MT short messages routed directly TE. (GSM 07.05)
Syntax:
AT+CSMS=<service>
Select message service.
Response is +CSMS: 1,1,1
Default setting
is 0.
AT+CSMS?
Query current setting.
Response is +CSMS:
<service>,<mt>,<mo>,<bm>
AT+CSMS=?
Show supported services.
Response is +CSMS: (0,1)
Parameters:
<mt>, <mo>, <bm>:
0
type
not
supported
1
type
supported
<mt>:
mobile terminated messages supported (value 1) or not (value 0)
<mo>:
mobile originated messages supported (value 1) or not (value 0)
<bm>:
broadcast type messages supported (value 1) or not (value 0)
+CSNS Single Numbering Scheme
This command is used to select the bearer service to be used when a call without
bearer service capability element is received. The command must be given before
the call comes. Parameter values set with the cCBST are used when
<mode> equals to a data service. (GSM 07.07)
Syntax:
AT+CSNS=[<mode>]
Set single numbering scheme mode. The
Default option
is 0.
AT+CSNS?
Query current setting.
Response is +CSNS: <mode>
AT+CSNS=?
Show supported modes.
Response is +CSNS: (list of supported
<mode>'s).
Values for <mode>:
0
voice (default)
2
fax (teleservice 62)
4
data
+CSQ Signal Quality
Returns signal strength as calculated by ME. Bit error rate reporting not supported.
(GSM 07.07)
Syntax:
AT+CSQ
Response is +CSQ: <rssi>, 99
AT+CSQ=?
Show supported values.
Response is +CSQ: (list of supported
<rssi>'s), (99)
Parameters:
<rssi>:
0
-113 dBm or less
1
-111 dBm
2...30
-109... -53 dBm
31
-51 dBm or greater
99
not known or not detectable
Summary of Contents for 6090
Page 1: ...Nokia 6090 AT Command Set ...
