Nokia 6090 AT Command Set
26
+CMEC ME Control Mode
Selects whether ME or TE (or both) are allowed to update ME physical UI
components. Display writing and Indicator updating are not supported. (GSM 07.07.)
Syntax:
AT+CMEC=[<keyp>[,<disp> [,<ind>] ]]
Default option
is 0 [,0] [,0].
AT+CMEC?
Query current setting.
Response is +CMEC: <keyp>, 0, 0
AT+CMEC=?
Show supported values.
Response is +CMEC: (list of supported
<keyp>'s), (0), (0)
Parameters:
<keyp>:
0
ME can be operated only through its
keypad
2
ME can be operated from both ME keypad
and TE
<disp>:
0
only ME can write to its display
<ind>:
0
only ME can set the status of its indicators
(cCIND can only be used to
read the indicators); see 20
+CMEE Report Mobile Equipment Error
This command controls the presentation of extended error information result code.
See also result code +CME ERROR. (07.07)
Syntax:
AT+CMEE=[<n>]
Default option
is 0.
AT+CMEE?
+CMEE: <n>
AT+CMEE=?
Response is +CMEE: (list of supported
<n>'s).
Parameters:
<n>:
0
dCME ERROR: <err> result code
and use ERROR instead
1
CME ERROR: <err> result code
and use numeric <err> values
2
CME ERROR: <err> result code
and use verbose <err> values
+CMER ME Event Reporting
Enables/disables the presentation of unsolicited keypad and indicator result codes.
Important note: This feature is avaible in 5.300 SW or later.
Syntax:
AT+CMER=[<mode>[,<keyp>[,<disp>
[,<ind>[,<bfr>]]]]]
Default option
is [2],0,[0],0,[0].
AT+CMER?
+CMER:
<mode>,<keyp>,<disp>,<ind>,<bfr>
AT+CMER=?
Response is +CMER: (list of supported
<mode>’s), (list of supported <keyp>’s),
(list of supported <disp>’s), (list of
supported <ind>’s), (list of supported
<bfr>’s).
Parameters:
Summary of Contents for 6090
Page 1: ...Nokia 6090 AT Command Set ...
