S e t t i n g s
55
FCC DRAFT
Date
Show or hide the date
In the standby mode, select
Menu
>
Settings
>
Time and date settings
>
Date
>
Show date
or
Hide date
.
Set the date
In the standby mode, select
Menu
>
Settings
>
Time and date settings
>
Date
>
Set the date
, enter the date, and select
OK
.
Change the date format
1. In the standby mode, select
Menu
>
Settings
>
Time and date settings
>
Date
>
Date format
and the format of your choice.
2. With
Date
on the display, select
Date separator
, and the separator of your
choice.
Set the auto-update of date and time
Auto-update is a network service. See "Network Services," page 7.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area (for
example, when you have traveled to another network or time zone).
In the standby mode, select
Menu
>
Settings
>
Time and date settings
>
Auto-
update of date & time
>
On
,
Confirm first
, or
Off
.
If you use the
Auto-update of date & time
option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you re-enter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■
Tone settings
From this menu, you can adjust the ringing volume, keypad tones, and other tone
settings for the currently active profile. See "Customize a profile," page 48.
