S e t t i n g s
53
FCC DRAFT
Touch tones are sent during an active call. You can send them manually from
your phone keypad, or send them automatically by saving them in your phone.
Set type
In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Touch tones
>
Manual touch tones
and on of the following options:
Continuous
—The tone sounds for as long as you press and hold a key.
Fixed
—Used to send tones of the duration you specify in the
Touch tone length
option.
Off
—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the
Fixed
option.
In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Touch tones
>
Touch tone length
>
Short
(0.1 seconds) or
Long
(0.5 seconds).
Welcome note
You can write a welcome note that briefly appears whenever you switch your
phone on, if provided by your service provider.
Predictive text input is not available for entering welcome note text.
1. In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Welcome
note
.
2. Enter a note (up to 44 characters). Press * to display and select from available
special characters.
3. When you are finished, select
Options
>
Save
.
Select
Delete
if you want to delete the previous text and begin creating another
welcome note.
Banner
Banner is a network service. See "Network Services," page 7 for more
information.
If your wireless service provider supports this feature, then you can choose
whether the display shows the operator logo when the phone is in the idle state.
In the standby mode, select
Menu
>
Settings
>
Phone settings
>
Banner
>
Default
or
Customize
.