USER INTERFACE
Front panel
Normal state
In normal state, this device displays the current
measurement reading continuously functioning as
an indicator.
The display can be set to three different modes.
They are:
•
Normal
. The display consists of a
channel number and a reading. The
channel can be selected with
^v
keys.
Channels: 1=input, 8=setpoint.
•
Setpoint
. The display is always showing
the adjustable setpoint (channel 8), and it
can be adjusted using buttons
^
and
v
.
•
MeaSet
. The display shows normally the
input (channel 1), but can be requested to
show the setpoint by pressing
^
or
v
for
the time specified in the settings. The
setpoint can then be adjusted. The
display is returned to input display when
no buttons is pressed for a while.
The indicator LEDs A1-A4 show the status of the
alarms. The Conf LED is lit when in configuration
state. Additionally, M1 blinks when the setpoint is
being adjusted.
Configuration state
Press
*
and
^
simultaneously two seconds to
enter configuration state. First, select the slot to
be configurated. The options are Master, Slot A,
Slot B, and Slot C. Proceed with
>
. If configuration
password is set, you will now need to enter it
(Cod.0 displayed). In case the password is not
known, switch the power off, hold
*
and
>
keys
pressed and switch the power on again.
5
