background image

NOIROT AUSTRALIA: 1 300 664 768

www.noirot.com.au

7

WARRANTY REGISTRATION:

IMPORTANT:

To validate your product warranty, you are required to do the

following:

1.

Register your product online at

www.noirot.com.au

, click on “Product

Registration” and fill out the required fields.

2.

You must also retain your receipt of purchase

WARRANTY CONDITIONS

Your Noirot Spot Plus electric panel heaters comes with a

LIFETIME

WARRANTY

, therefore any replacement of faulty parts or repairs of any kind

must be carried out by a qualified person and authorised by Noirot Australia Pty
Ltd or their approved representative. Failure to do so will

VOID

the

WARRANTY

.

Noirot Australia Pty. Ltd. reserve the right to reject any warranty claim deemed to
be false. Retailers must have warranty claims authorised by a representative of
Noirot Australia.

If you believe your product to be faulty and under warranty you are required to do
the following:

1.

Return the product, at your expense, to the place of purchase for
assessment by an authorised representative of Noirot Australia.

2.

This may require leaving the product at the place of purchase.

3.

If the product is deemed faulty and under warranty, the place of purchase
of the product will order a replacement heater to which Noirot Australia, at
our cost, will deliver the heater to the place of purchase.

4.

The consumer will then be required, at their cost, to pick up the
replacement heater from the place of purchase.

5.

If the heater is faulty but not deemed to be under warranty, an
explanation will be provided to the consumer and that the faulty heater
can be picked up by the customer from the place of purchase.

Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.

If you have any queries regarding your product or its warranty please contact:

Noirot Australia Pty Ltd
80-84 Burlington St
Oakleigh VIC 3166
P:

1 300 664 768

E:

[email protected]

Summary of Contents for Evolution 7384









Reviews: