NOIROT AUSTRALIA: 1 300 664 768
www.noirot.com.au
2
RECOMMENDATION FOR WALL INSTALLATION
This heater is sold ready for D.I.Y. installation, with Wall bracket and flexible cord
supplied. To remove the wall bracket from the heater you need to push down on
the spring loaded clips located at the top of the bracket. This can be done by
using your fingers or, if preferred, a screwdriver (N
o
: 1 Fig.1). Fit the wall bracket
to the wall with suitable fixing method according to the surface you mount the
heater on (not included). Place the heater on to the bracket and clip into position.
The heater must not be located immediately below a socket outlet
(as per
requirement of Clause 7.12 of AS/NZS 60335.2.30).
To install the
Skirting
model panel heaters, use
Fig.2 as a guide.
If required, make a template (as shown in Fig.3)
to assistant you in mounting the wall brackets
for the panel heaters.
Fig. 2
Fig. 3
Fig. 1
