NOIROT AUSTRALIA: 1 300 664 768
www.noirot.com.au
5
ELECTRICAL CONNECTION
This heater is fitted with an Australian Approved Flexible Cord and Plug. For wall-
mounted installations connection can be either by plugging into an existing 10
amp power point (D.I.Y.) or direct wired by a Licensed Registered Electrical
Contractor, who is required to issue a Certificate of Electrical Safety.
PLEASE NOTE:
For safety reasons the Flexible Cord must not be modified or repaired in any way.
If the Cord is damaged, it must be replaced by a Noirot appointed and approved
service agent. If there are any concerns, contact Noirot Australia Pty Ltd on 1 300
664 768 before plugging it in.
IMPORTANT:
Do not plug heater into a Power Board, Double Adaptor or Extension Lead.
IMPORTANT: DO NOT COVER THE HEATER
Avoid blocking air flow to and from the heater with clothing, open doors, furniture
and small toys or paper inserted into the louvers. This will cause the heater to
over-heat and activate the safety thermal cut-out switch.
If the “Over Temperature Safety Thermal Cut-Out Switch” is activated, the heater
will automatically switch off to limit the temperature to a safe value. To reset the
thermal cut-out, simply switch the heater off, unplug it from the power point and
remove the obstruction(s). Plug the heater back in and switch it on. The thermal
cut-out switch will reset after a few minutes and the heater will function normally.
USING YOUR HEATER FOR THE FIRST TIME
Remove the heater from its packaging (please dispose of packaging responsibly).
Contents should be as follows:
1.
Heater
2.
Wall bracket (pre-attached to the back of the heater).
3.
Instructions for installation and use (8 page booklet).
Ensure the heater is correctly mounted on the wall or fitted to the castors prior to
turning it on. Remove the white plastic protective covers from the plug pins and
insert the plug into the wall socket.
This heater is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person to
ensure that they can use the heater safely.
NOTE:
When the heater is turned on for the first time, or after it has been off for a long
period, such as during the summer months, you may experience a slight burning
smell.
This is quite common and should disappear after a few minutes.
If it
should persist, switch the heater off and have it inspected.
