LUBRICATION POINTS:
Lubricate the grease fi ttings A, B, and C after every 8 hours of operating.
Also lubricate with grease, the cross pieces, and the driveshaft tubes after every
10 hours of operation.
After lubrication, do not remove the excessive grease which is on the grease fi tting
nozzle, this is for protection.
MAINTENANCE
fi g. 12
fi g. 13
Your RoyalFlow requires a minimum of maintenance in order to achieve perfect ope-
ration and maximum durability. Then the following procedures are indispensible:
· Keep the machine clean. Remainders of fertilizer, which stay inside the reservoir
harden quickly and can damage the opening of the dosing valves and damage
the opening and closing mechanism.
· Clean routinely the inside of the pendulum well.
· Keep the machine properly lubricated.
Before extended stoppages, we recommend the following procedure:
· Wash the machine completely, lubricate it, and store it in a location protected
from the sun and rain.
Lubricate the recommended following places using a grease gun. Use special grease for ball
bearings, lithium soap base, NLGI 2 EP classifi cation.
Grease example: LUBRAX LITH-2.
Before lubricating, clean the grease fi ttings well as to avoid contaminating the grease. Replace
damaged grease fi ttings.
18 RoyalFlow-600
C
B
A
C
