Nodka PANEL5000-A121, User Manual

Page: 38 / 44

PANEL5000 ‐ A121 User Manual
38
Warning:
The precautions outlined in this chapter should be strictly followed. Failure to follow these
precautions may result in permanent damage to the PANEL5000 ‐ A121:
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.

Follow the electrostatic precautions outlined below whenever the PANEL5000 ‐ A121 is
opened.

Make sure the power is turned off and the power cord is disconnected whenever the
PANEL5000 ‐ A121 is being installed, moved or modified.

Do not apply voltage levels that exceed the specified voltage range . Doing so may
cause fire and/or an electrical shock.

Electric shocks can occur if the PANEL5000 ‐ A121 chassis is opened when the
PANEL5000 ‐ A121 is running.

Do not drop or insert any objects into the ventilation openings of the PANEL5000 ‐ A121.

If considerable amounts of dust, water, or fluids enter the PANEL5000 ‐ A121 , turn off
the power supply immediately, unplug the power cord, and contact the
PANEL5000 ‐ A121 vendor.

DO NOT do the following:

DO NOT drop the PANEL5000 ‐ A121 against a hard surface.

DO NOT strike or exert excessive force onto the LCD panel.

DO NOT touch any of the LCD panels with a sharp object.

DO NOT use the PANEL5000 ‐ A121 in a site where the ambient temperature exceeds the
rated temperature
A.1.2 Anti ‐ static Precautions
Warning:
Failure to take ESD precautions during the installation of the PANEL5000 ‐ A121 may result in
permanent damage to the PANEL5000 ‐ A121 and sever injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including
the PANEL5000 ‐ A121. Dry climates are especially susceptible to ESD. It is therefore critical