3
4
5
Screw the sanding/grinding guide onto the rotary tool where the housing
cap would normally be.
If you're having trouble recognizing the
sanding/grinding guide in your rotary tool kit, flip back to page 16.
To change the depth of the guide, rotate the screw on the side of the
sanding/grinding guide and move the guide up or down, depending on
what's the depth you're aiming for.
Use one of the flat surfaces of the grinding guide to control the
movement of your application.
How to attach and use the sharpening guide
1
2
3
4
Remove the housing cap from your rotary tool.
You can see a picture of the
housing cap & its location on page 12.
Attach your chosen grinding stone to the rotary tool using the collet nut kit -
follow the how-to on page 28.
Screw the sharpening guide onto your rotary tool where the housing cap
would normally be.
If you're having trouble recognizing the sharpening
guide in your rotary tool kit, flip back to page 16.
Use the sharpening guide by placing the blade of the tool you intend to
sharpen along the angled edge of the guide for an even finish.
38
Summary of Contents for NRT-128AC
Page 2: ...1...
