How to attach and use the cutting set
1
2
3
4
5
Remove the housing cap from your rotary tool.
You can see a picture of the
housing cap & its location on page 12.
Attach your chosen drill bit to the rotary tool using the collet nut kit - follow
the how-to on page 28. There's 3 drill bits included in your rotary tool kit - you
can see what they look like on page 23.
Take the cutting guide, and notice the inner core - it has numbers on it.
Before attaching the cutting guide to your rotary tool, make sure that the
long groove of the inner core is secured in line with the screw on the
guide's outer shell. You can move and adjust the inner core by turning
the screw. The inner core in combination with the screw is for depth
adjustment, while the outer shell is the actual guide.
If you're having
trouble recognizing the cutting guide in your kit, flip back to page 15,
where you'll see a photo of it.
Screw the cutting guide onto the rotary tool where the housing cap would
normally be.
To use the cutting guide, adjust the height/depth by turning the screw on
the side of the cutting guide, and move the rotary tool around with the
cutting guide flat on the surface you're cutting.
How to attach and use the sanding/grinding guide
1
2
Remove the housing cap from your rotary tool.
You can see a picture of the
housing cap & its location on page 12.
Attach your chosen sanding/grinding accessory to the rotary tool using the
collet nut kit - follow the how-to on page 28.
37
Summary of Contents for NRT-128AC
Page 2: ...1...
