3.
Put the collet nut with the collet on
the rotary tool shaft.
4.
Take the accessory you had put
aside, and insert it in the collet nut.
5.
Press down the shaft lock button,
and rotate the collet nut with the
accessory inside until the nut is tight
and you cannot rotate it any more. If
you're confused about which is the shaft
lock button, head back to page 12.
6.
To make sure that the collet nut is as
tight as it can be (you don't want to
suddenly have your cutting discs flying
off), take the wrench that came in the
rotary tool kit, and tighten the nut. And
yes, keep the shaft lock button
pressed down while doing so - it
prevents the shaft from rotating while
you're adjusting the nut. If you want to
see what the wrench looks like to locate
it in your kit, flip back to page 23.
To change the accessory, press the shaft lock button down, rotate the collet nut
off, and repeat the process from Step 1.
29
Summary of Contents for NRT-128AC
Page 2: ...1...
