How to fit a sanding band
1.
Loosen (not remove) the small
screw on top of the black rubber
sanding drum with the screwdriver.
This will contract the rubber, so you
can slide the sanding band onto the
drum. Picture of the wrench/screwdriver
can be found on page 23, sanding bands
and drums on pages 21 -22.
2.
Take the appropriate size sanding
band onto the sanding drum, and slide
it into the tightened sanding drum.
3.
Tighten the screw on top of the
sanding drum with the screwdriver.
This will expand the rubber, so the
sanding band won't slide off the drum.
33
Summary of Contents for NRT-128AC
Page 2: ...1...
