NOCRY NOCRY37, Instruction Manual

Page: 31 / 36

29
Material runs down the
object being painted
v
Too much coating
material has been
applied
v
Reduce the material
volume
v
The distance is too
small
v
Increase the distance
Excessive paint mist
(overspray)
v
The distance to the
object is too large
v
Reduce the distance
to the object
v
Too much coating
material
is being applied
v
Reduce the material
volume
v
The air pressure is
too high
v
Reduce the air
volume
v
The coating sub-
stance is over-diluted
v
Reduce the degree of
dilution of the coating
material
v
Incorrect spraying
technique
v
See “How to get the
best results” on page
22
Paint in the ventilating
hole
v
The seal is dirty
v
Clean the seal
v
The seal is defective
v
Replace the seal
MAINTENANCE
Good news - other than some routine maintenance, there are no parts inside your
paint sprayer that require professional maintenance. All that’s needed is some
good old fashioned TLC.
However, for safety reasons and for your overall peace of mind, we recommend
having your paint sprayer given the once-over by an expert at least every 12
months to ensure that it will continue to operate safely. We must mention though
that all (potentially deviating) national inspection and maintenance regulations
must be observed.