MAINTENANCE
51
EZ Rider
t
HP 330780 (4--04)
LED FAULT CODE DISPLAY
The battery discharge indicator also displays the
fault codes on the LED indicator, if there is a
problem with the machine.
Fault codes are identified by the blinking bars on
the LED. There are ten different fault codes that
can be displayed by the LED indicator.
The number of bars that are blinking on the LED
can be translated into each diagnostic message
on the chart below. Diagnostic message 1 -- (Low
Battery Voltage) notifies the operator that it is time
to recharge the machine batteries. Diagnostic
message 10 -- (High Battery Voltage) notifies the
operator that it is time to recharge the machine
batteriesDiagnostic message 4 -- (Seat Switch
Open) signals that the machine is on, and the
operator is not in the operator’s seat.
If the LED displays any diagnostic message other
than messages 1, 4 or 10, contact your NOBLES
service representative.
DIAGNOSTIC MESSAGE
10
High Battery Voltage
9
Solenoid Brake Fault
8
Control System Fault
7
Throttle Fault
6
Recovery Tank Full Fault
5
Vacuum Motor Fault
4
Seat Switch Open
3
Brush Motor Fault
2
Traction Motor Fault
1
Low Battery Voltage
