Warnings and Safety
3
Installation and Assembly
4
Preparing for Operation
5
Preparing to Use the Noblerex K2
8
Operating the Noblerex K2
10
Exercise Programs
12
Troubleshooting/Warranty Information
15
Table of Contents
Page 2
NOBLEREX K2 MANUAL
AESTHETICMD
Page 15
Troubleshooting/Warranty Information
Problem
Resolution
When Power is connected the
equipment does not operate.
Have you pressed the power
button on the operation board
or remote control? The K2 will
not operate until the power
button is engaged.
None of the LED lights are on
when the power cord is
plugged into an outlet.
The Noblerex K2 is
malfunctioning. Discontinue
use and contact AestheticMD
.
There are two, three, or four
LED lights flickering and
making noise on both sides of
the operation board.
In the event of overheating,
The NobleRexK1 has a safety
mechanism that automatically
shuts the machine off to cool
down. Wait at least 30
minutes for before attempting
to use it again.
There is a severe vibration or
noise when the NobleRexK1
is operating.
Is the floorboard resting on a
flat, hard surface? Try placing
the machine in another area
without carpet or
incline/declines
.
If none of the solutions above remedy the issue pertaining to your
NobleRexK1, please contact AestheticMD at (602) 485-3621.
Warranty Information
The NobleRexK1 has a warranty against manufacturer’s defects for 1
year from the date of purchase. The warranty does not cover
malfunctioning caused by neglect, unauthorized disassembly, natural
disaster, or negligence of warnings and precautions. If your
NobleRexK1 is malfunctioning after the warranty expiration date, please
contact AestheticMD for repair information.