Page 8
NOBLEREX K2 MANUAL
AESTHETICMD
Page 9
Preparing to Use the NobleRexK2
The NobleRexK1 has two modes of control, AUTO and
MANUAL which can be adjusted at any time during operation.
Manual control
: This mode lets the user choose a
combination between vibration intensity and operation time.
The vibration intensity (speed) is measured on a scale of 1 to
10, 10 being the highest and 1 the lowest. Time also works on
a scale of 1 to 10, each increment representing 1 minute.
Auto control
: This mode provides the user with a choice
between 3 different exercise programs, each with a varying
degree of vibration intensity (speed) and time. Each mode
has a programmed pattern of speed and vibration intensity
that fluctuates throughout the programmed exercise time.
Below is a list and description of each mode:
Auto mode-1
: Vibration intensity fluctuates between 1 and 5
for ten minutes
Auto mode-2
: Vibration intensity fluctuates between 1 and 7
for ten minutes
Auto mode-3
: Vibration intensity fluctuates between 1 and 10
for ten minutes
The recommended use of a NobleRexK1 is 1 to 3 times/day
for ten minutes each time beginning with
auto mode-1.
You
may gradually extend usage time and frequency, depending
on your personal physical condition and comfort. Please
consult a physician when you are ready to increase the time
or intensity of your exercise.
The time of use is set at ten minutes every time the power is
turned on or off. If you choose to exercise less then ten
minutes at a time, you must manually change the time.
The NobleRexK1 will automatically return to standby mode
after 10 minutes of use or any manually programmed time up
to 10 minutes.
The NobleRexK1 rated operation time is 10 minutes with a
standard weight of 150kg or 353lbs. It can be consecutively
used 8 hours or longer, however this is not recommended
without consulting a doctor prier to any extended period of
use.
When power is first connected to the NobleRexK1, the
machine will produce a beeping sound accompanied by the
LED lights indicating TIME and SPEED blinking left and right.
This indicates that the NobleRexK1 is in standby status.
Always step onto the vibration plate and find a comfortable
