Operating the Noblerex K2
Note: If the power light is off and there is no
sound, check to make sure the machine is
plugged into an outlet.
Note: When LED illuminates on both sides of
the operation board simultaneously, a warning
tone will sound and the NobleRexK1 will shut
down. This is a safety feature designed to
protect the machine and user from harm. If
this happens, please discontinue use of the
NobleRexK1 and allow some time to cool down.
The NobleRexK1 will re-activate when it is
ready. Example: When three LED’s on both sides
of the control board are turned on
simultaneously and a warning tone goes off
consecutively, or when four LED’s on both sides
of the control board illuminate simultaneously
and a warning tone goes off, the machine will
shut down.
Page 10
NOBLEREX K2 MANUAL
AESTHETICMD
Page 7
(1)
The NobleRexK1 is powered by pressing this button once. The
power is shut off by pressing the button again.
(2) Auto mode 1
is the first button from left to right. This mode
provides a maximum speed or intensity that fluctuates between 1
and 5. Auto mode 1 is recommended for everyone to use and is
emphasized as the mode to use for beginners.
(3) Auto mode 2
is the middle button between the three auto mode
buttons. This mode provides a maximum speed or intensity that
fluctuates between 1 and 7. Auto mode 2 is recommended for
intermediate users.
(4) Auto mode 3
is the far right button between the three auto mode
buttons. This mode provides a maximum speed or intensity that
fluctuates between 1 and 10. This is the most intense auto
program available on the NobleRexK1. It is highly recommended
that only experts and users who are familiar with the NobleRexK1
try this program.
(5,8)
Two buttons represent the time by minute that the NobleRexK1
operates. Each push of either button represents one minute.
(5)
This button increases the time by minute that the K2 operates. The
program increases by one each time the button is pushed.
(8)
This button decreases the time of a program by one each time the
button is pushed
.
(9)
Pushing this button switches the NobleRexK1 into manual mode.
Step onto the vibration plate and find a comfortable
position. Press the power switch on the remote control or
operation board to begin