![Noblelift PT 20I Instruction Handbook Manual Download Page 18](http://html1.mh-extra.com/html/noblelift/pt-20i/pt-20i_instruction-handbook-manual_1698033018.webp)
17
Fig.13: Battery charging
c.
Charging
•
Only well-matched charger can be use to charge the
battery.
•
Before using the charger, please fully understand the
instructions of the charger instructions.
•
Always follow these instructions!
•
The room, where you are charging must be well
ventilated.
•
The exactly charge status can be only checked from
the discharge indicator. To control the status, you must
interrupt charging process and the start truck.
Park the truck at a dedicated secure area with a dedicated power supply.
Lower the forks and remove the load.
Remove the battery cover.
Off the truck and connect the battery plug to the port of external charger. Then connect the charger
to the main power supply.
The charger starts charging.
Disconnect the battery plug after charge is completed, disconnect the connector from the socket
and place it in the designated pocket.
Connect the battery plug with the plug on the truck, and install the battery cover back.
8. REGULAR MAINTENANCE
•
Only qualified and trained personnel are allowed to do maintenance on this truck.
•
Before maintaining, remove the load from the forks and lower the forks to the
lowest position.
•
If you need to lift the truck, follow chapter 4 by using designated lashing or jacking
equipment. Before working, put safety devices (for instance designated lift jacks,
wedges or wooden blocks) under the truck to protect against accidental lowering,
movement or slipping.
•
Please pay attention to maintain the tiller lever. The gas pressure spring is
pre-loaded by compression, carelessness can cause injury.
•
Use spare parts which are approved and released by your dealer.
•
Please consider that oil leakage of hydraulic fluid can cause failures and accidents.
•
Only trained service technicians are allowed to adjust the pressure valve.
If you need to change the wheels, please follow the instructions above. The castors must
be round and have no abnormal abrasion.
Check the emphasized items on the maintenance checklist.
Summary of Contents for PT 20I
Page 2: ...1...
Page 4: ...3...
Page 28: ...27 Sign not under on forks O Sign Caution charger H Warning sticker R Warning sticker Q...