Noblelift PT 20I, Instruction Handbook Manual

Page: 16 / 32

15
g.
Braking
THE BRAKING PERFORMANCE DEPENDS ON THE TRACK CONDITONS AND
TRHE LOAD CONDITONS OF THE TRUCK
The braking function can be activated in several ways:
•
By moving the accelerator button (17) back to the initial ‘0’ position or by releasing
the button, the regenerative braking is activated. The truck brakes until it stops.
•
By directly moving the accelerator button (17) from one driving direction to the
opposite direction, the truck brakes regenerative will be activated until it starts
travelling into the opposite direction.
•
The truck brakes, if the tiller is moved up or down to the braking zones (‘B’). If the
tiller is released, the tiller moves automatically up to the upper baking zone (‘B’).
The truck brakes until it stops.
•
The safety (belly) button (1) prevents the operator from being crushed. If this button
is activated, the truck decelerates and/or starts travelling into the backwards
direction (‘Bw.’) for a short distance and stops. Please consider, that this button also
operates, if the truck is not travelling and the tiller is in the operating zone.
h.
Malfunctions
If there are any malfunctions or the truck is inoperative, please stop using the truck and push the
emergency button (5). If possible, park the truck on a safe area and rotate the key (6) counterclockwise
as well as remove it.
Immediately inform the manager or aftersales service employees. If necessary, tow the truck out of the
operating area by dedicated towing/lifting equipment.
i.
Emergency
Keep a safe distance in emergencies or in the event of tip over. If possible, push the emergency button
(8) and all electrical functions will be stopped.
7. CHARGING AND REPLACEMENT OF BATTERY
•
Only qualified personnel are allowed to service or charge the batteries. You must
observe the instructions of this handbook and from the battery- manufacturer.
•
Recycling of batteries undergoes national regulations. Please follow these
regulations.
•
While handling batteries, open fire is prohibited, for gases could cause explosion!
•
In the area of battery charging neither burning materials nor burning liquids is
allowed. No smoking and ensure good ventilation.
•
Park the truck securely before starting charging or installing/changing the batteries
•
Before finishing the maintenance work, make sure that all cables are connected
correctly and will not disturb other components of the truck.