
42 OF 46
Here, you are nearly at the final assembly step of this Triangular Pergola.
These 3 ( three ) pieces of
Roof Slats (G)
on the right are the last components to be
placed and affixed onto all 3 ( three )
Roof Support Joists
.
These 3 ( three ) pieces of Roof Slats on the right are to be bolted in at two places:
1. ) from the
UNDERSIDE
of the
FRONT - Roof Support Joists
,
UPWARDS
and
into the
ROOF SLATs
.
2. ) from the
UNDERSIDE
of the
CORNER - Roof Support Joist
.
UPWARDS
and
into the
ROOF SLATS
Next, re--position the Step Ladders to the
RIGHT Pillar Panel
:
a. ) at the
CORNER - Roof Support Joist
area and
b. ) at the
FRONT - Roof Support
Joist area, as shown above.
2 ( two ) partners are on the Step Ladder shall receive and affix the
ROOF Slats
.
The 3rd ( third ) partner shall hand the
ROOF Slats
to the 2 partners on the Step
Ladders.
Then place the
Roof Slat
into position.
With one hand apply pressure by Pulling the Roof Slat 'groundwards'.
Use
Screw (
①
)
and
Screw Driver (
⑫
)
, and drive the Screw 'skywards', as shown
above.
FULLY TURN IN ALL Screws at ALL points of fixture.
Repeat the same steps to affix the remaining 6 ( Six ) pcs of ROOF Slats (G ).
Ensure and
FULLY SECURE AND TIGHTEN ALL SCREWS
at all Roof Support
Joists and Roof Slats.
Descend form the Step Ladders...
Then,
FULLY STAKE IN ALL GARDEN STAKES FULLY AND COMPLETELY
into
the garden grounds.
The above completes the assembly for Your Triangular Pergola, and is ready for
use.
Summary of Contents for TRIANGULAR PERGOLA
Page 37: ...37 OF 46 Step 25 E E 2 9 8 9 7 9 7 9 2 8...
Page 39: ...39 OF 46 Step 26 2 9 8 9 7 9 7 9 2 8...
Page 41: ...12 1 41 OF 46 G Step 27 12 1...
Page 44: ...12 1 44 OF 46 G 12 1...