Nobis UNICA 10 C, Instructions For Installation, Use And Maintenance Manual

Page: 25 / 40

Use and maintenance manual - Model: “UNICA 10 V/C”
25
ENGLISH
Edit the data highlighted using the keys
Confirm the data changed using the key
To return to the STAND-BY screen, use the
key , repeating the operation multiple times.
OK
11.8 FIRMWARE VERSION
To view the version of the firmware installed for
the appliance model supplied, follow the procedure
in this paragraph. This function is useful for the support
centre to control availability of the new updates to
install on the product, if necessary.
OPERATING PROCEDURE:
MENU >> USER SETTINGS >> SETTINGS >> FW VERSION
Access the menu by pressing key
Scroll the items to USER SETTINGS with the key
Access the menu by pressing key
Scroll the items to SETTINGS with the key
Access the menu by pressing key
Scroll the items to FIRMWARE VERSION with the key
Access the function by pressing key
OK
OK
OK
OK
To return to the STAND-BY screen, use the
key , repeating the operation multiple times.
When you browse from one screen to another, you
will display the following screen for a few seconds:
GENERAL INFORMATION:
This screen indicates the remote control is trying
to communicate with the appliance, a useful
operation to recover information to display to the
end user.
If communication is absent, the writing FIELD followed
by a number appears. In this case, simply approach
the appliance to re-establish
communication.
12 CANALIZATION
(when applicable)
The products of the range equipped with
canalization option can be equipped with single
or double canalization. It can be disabled, set
manually or managed automatically, depending
on the temperature you want to obtain in the room
where canalization is installed.
12.1 SINGLE CANALIZATION
In this paragraph, the system is detailed to enable/
disable and set in manual the ventilation speed
assigned to canalization.
Furthermore, the desired room temperature can be
also reached by taking advanced of the automatic
management of the stove canalization system.
1 2
1
2
11.9 ANTICONDENSATION
(exhaust fumes temperature)
This function ensures that the temperature
of exhaust gases remains higher than condensing
temperature.
OPERATING PROCEDURE::
MENU’ >> USER SETTINGS >> SETTINGS >> ANTICONDENSATION
Access the menu by pressing key
Scroll the items to USER SETTINGS with the key
Access the menu by pressing key
OK
OK
The function results in a slight increase of pellet
consumption to remedy this condition.
The causes of condensation can be related to the
installation but above all to the yield of the pellets
and its size.
Scroll the items to SETTINGS with the key
Access the menu by pressing key
Scroll the items to ANTICONDENSATION with
Activate/Deactivate the function by pressing
of the key
OK
OK
To return to the STAND-BY screen, use the
key , repeating the operation multiple times.