6
Solar Collectors - APOLLON
The collector is packed in a carton box. All the parts of the support base system are packed in a carton box, if the
installation needs so demand.
TRANSPORTATION AND HANDLING INSTRUCTIONS
Caution:
the supporting base must be assembled before the installation of the collector.
The collector is packed in a cardboard box. During its transport and handling, all safety indications on the packaging
should be respected. The packing materials must be removed from the collectors at the point of installation, so as
to protect them from shocks, paying attention not to support the collectors on their pipe connections. When the
packaging materials are removed the collectors must be placed directly onto their supporting base, which must be
assembled according to the instructions in this leaflet.
FLAT SURFACE
INCLINED SURFACE
One type of supporting base
system, electrostatically painted,
made of 2.5mm thick galvanised
steel, with stainless steel screws
and nuts for installation on
flat
or
inclined surfaces
SUPPORT BASE
Normal absorber design with louvers
.
Air turbulence increases heat loss
Complete area technology
The uniform area prevents heat loss
