3
PACKING LIST
1. THE TV SET
2. QUICK START GUIDE
3. REMOTE CONTROL
4. POWER CORD (ATTACHED TO TV SET)
SAFETY WARNINGS AND NOTICE
Thank you for choosing the NOA Vision SMART LED TV. This
product has been tested during design to ensure that quality and
safety standards have been met. In order to get the best user
experience and to extend the life of your device, please read and
follow these user instructions carefully.
Save these user instructions for later use.
exclamation-triangle
WARNING - MAY RESULT IN CASUALTIES
Ban
INDICATES ACTIONS THAT MAY HARM YOU, OR DAMAGE THE TV
exclamation-triangle
WARNING – MAY RESULT IN PERSONAL INJURY OR PROPERTY LOSS
CIRCLE
INDICATES ACTIONS THAT MUST BE PERFORMED IN ORDER TO
ENSURE PROPER FUNCTION OF THE TV
DO NOT USE THE DEVICE UNDER THE
FOLLOWING CIRCUMSTANCES:
• Power failure or unstable operating conditions
• Abnormal sound or smell from the device
• If the AC power cord is damaged
• If the casing or screen of the device is damaged
• If water or any other liquid enters the TV set
In these cases, unplug the TV
and contact the authorized
service center.
WARNING: In case there is gas leakage in the room, do not
unplug the TV set from the socket as it may cause sparks. Close
the gas valve immediately and open the doors and windows.
exclamation-triangle
WARNING
• Use only 240V / 60-50Hz power source
• All cables must only be unplugged after the unit has been
switched off
• Place the device on a flat, hard surface or fix it to the wall to
avoid injury and damage to the device
• Do not keep the device in the environments with:
1. Direct sunlight, humidity, too high or too low
temperature.
2. Environments containing larger amount of dust or dusted
powders.
3. Flammable or explosive devices
4. Flammable or corrosive gases and liquids.
5. Bathroom, kitchen, outdoor, etc.
• Do not connect the device to a damaged or improper outlet
and ensure that the plug is properly connected to the socket
• Ensure that the plug and socket are clean of metal particles,
moisture and other impurities
• Protect the power cord from damage
1. Do not modify the power cord
2. If necessary, use only approved adapters for the power
cord region (US/EU, etc.)
3. Do not place heavy objects and furniture on the power
cord
4. Keep the power cord away from heat sources
5. Do not pull the power cord while unplugging.
• Do not connect too many devices to the same (extension)
cable due to fire and electric shock hazard.
• Do not let an open flame (such as a lit candle) approach the
TV due to fire and electric shock hazard.
• Avoid inserting small objects into the vents of the unit.
• Avoid dripping fluid into the vents.
• Do not cover the ventilation openings while the unit is
operating. The slots on the case are designed to release heat
so as to assure that all inside components will not reach
an extra high temperature, and that they are able to work
normally for a long period of time.
exclamation-triangle
DO NOT TOUCH THE ELECTRIC SOCKET WITH WET OR DAMP
HANDS.
exclamation-triangle
TURN OFF THE TV DURING THUNDERSTORMS AND UNPLUG
THE PLUG AND ANTENNA CONNECTOR FROM THEIR SOCKETS.
exclamation-triangle
DO NOT DISASSEMBLE OR REPAIR THE TV UNLESS YOU ARE
AUTHORIZED TO REPAIR IT.
• When transporting the TV, grasp the device by the corners
of the screen and hold it at the bottom. Avoid touching the
screen.
• Prolonged viewing of a still image (for example, a TV channel
logo) may cause so-called Burn-in effect; where the image
remains on the screen even when the TV is off. If the "Burn-in"
effect occurs on your TV set, the repairs are not covered by the
warranty.
