background image

numbers:

FL301 for a 1 litre bottle or FL305 for a 5

litre bottle)

MAINTENANCE

Cleaning:

Clean the outside of the unit with a soft damp cloth, with

a drop of washing-up liquid.
To clean the appliance:

Remove the tank from the unit and empty out any water.

Rinse the tank with a 20% solution of white vinegar. This

will remove any lime deposits and kill bacteria. After forty

hours’ use, and before long-term storage, operate the

machine with the vinegar solution to clean fog-fluid

residues from the heating block.

If the mains lead is damaged, it must be replaced by the

manufacturer or an authorised service centre. If the

mains plug needs to be

replaced, proceed as

follows:

 Connect the brown wire

to the terminal labelled "L".

 Connect the blue wire to

the terminal labelled "N".

 Connect the green-yellow

wire to the terminal

labelled with the earth symbol.

 Make sure that the cord-grip is positioned correctly

(over the outer sheath of the cable) and it fully tightened.

Fuse

(5 Amp)

Brown (Live)

Blue (Neutral)

Green and
Yellow (Earth)

If the plug is fitted with a 13 A fuse, replace it by a 5 A

fuse.

 Page 5

Summary of Contents for NJ421









Reviews: