Nivus NivuLog Easy V3, User Manual

Page: 74 / 141

Blink code Colour Description Solution/cause
0x --- Transport lock (transmission OFF,
measurement OFF) If the Aloha transmission mode is
initiated via the button,
the NivuLog Easy V3 resumes
operation in accordance with the
configuration (transmission ON,
measurement ON).
1x Green Last connection OK ---
2x Red Last transmission faulty Try again later
7x Red Network block/no matching provider
l
Improve position of the antenna
l
Check whether the device is
located in the coverage area of a
service provider that is supported
by the integrated SIM chip
l
Deallocate the netlock (see
"DeviceConfig Manual " - upon
request)
8x Red No GSM network
l
Try again later
l
Improve position of the antenna
9x Red Incorrect PIN/1 attempt remaining
l
No PIN code was specified.
l
The specified PIN code is not
correct.
l
One remaining attempt to enter
the PIN code before the SIM card
is locked
Insert the SIM card into a mobile
telephone and verify the correct PIN
code. You may need to unlock the SIM
card with the PUK code.
10x Red No GPRS connection Improve position of the antenna
11x Red No Device to Web server available
l
Check whether port 51241 is
released on the Device to Web
server
l
Try again later
12x Red Faulty SIM chip Contact support
Error/status codes
Status LED Colour Description
Flickering Green Establishing connection
Lights up Green GPRS connection established or button actuated
Off --- Normal measuring operation according to configuration until the next transmission
Operating states
74 of 141 NivuLog Easy V3 - Rev. 03 as of 24.10.2018