Nivus NivuLog Easy V3, User Manual

Page: 69 / 141

Chapter 9 Initial Start-Up
Chapter 9 Initial Start-Up
9.1 User information
Before you connect the NivuLog Easy V3 and place it into operation, you must observe and comply with the
following user information!
This manual contains all information that is required for using the device.
Is intended for technically qualified personnel who have the relevant knowledge and experience in the area of
measurement technology.
Read this manual carefully and completely in order to ensure the proper functioning of the NivuLog Easy V3 .
Contact NIVUS GmbH (see "Branch offices" on page 141) if anything is unclear or if you encounter difficulties
with regard to installation, connection or configuration.
If necessary, also refer to the manuals of the accessory parts when commissioning the complete system.
These manuals are included in the scope of delivery of the accessory parts.
9.2 General principles
The entire measurement system may only be placed into operation after completion and inspection of the
installation. Study the manual thoroughly before placing into operation to prevent faulty or incorrect
configuration.
Utilise the manual to familiarise yourself with the operation of the NivuLog Easy V3 and the input screens of
the Device to Web server before you begin with the configuration.
9.3 Commissioning the system
Note: It is recommended that the NivuLog Easy V3 is first placed into operation in the office before mounting
the device permanently at the place of use. During this process, you should create a site for the later operation
on the Device to Web server (see "Device to Web Server Manual" - upon request) and determine a site
configuration (see "Site configuration" on page 75). Take the opportunity to get to know the functions of the
device in a stable environment. You can also use suitable test signals to simulate the sensors to establish the
optimum configuration of the NivuLog Easy V3 prior to its actual first use. This reduces the amount of time
required for on-site installation to a minimum.
The following work should be completed in the office before you go to the future location of the device:
1. If necessary, create a customer on the Device to Web server (see "Device to Web Server Manual" -
upon request).
2. Within the selected customer, use the "NivuLog Easy V3" application template to create a new
site/application for operation on the Device to Web server (see "Device to Web Server Manual" - upon
request).
3. Configure the created site/application according to your requirements (see "Site configuration" on page
75).
4. Connect the antenna (see "Connecting the GSM antenna" on page 57). The antenna is not included in
the scope of delivery and must be ordered separately.
NivuLog Easy V3 - Rev. 03 as of 24.10.2018 69 of 141