Setting Parameters
page 95
rev. 00 / 12.04.2017
25.5.1 Change (System) Password
Default
password: "2718"
NIVUS recommend to change this password in order to protect the system from unauthorised
access. You are free to select any password with a maximum length of ten digits.
For your own safety we recommend to share your password only with
authorised individuals
.
Once you have changed the password it
cannot
be restored by NIVUS!
If your password should get lost it is necessary to execute a total system reset. In such a case
all parameters previously set will be lost and must be set again.
Write down your password and store it in a safe place.
F
c
See also chapter „21.2 Change Password“.
Fig. 25-9
Changing the (system) password
25.5.2 Restart
A transmitter restart will interrupt the current measurement process.
The system will reboot using the parameters set (saved). After booting the system behaves as
when the instrument is switched on (analog to PC).
This menu point replaces the system shutdown and reboot. All parameters, counters and
saved data are retained.
Fig. 25-10 Restart
25.5.3 Measurement Restart
This option interrupts the currently running measurement process and starts a new measure-
ment.
