5
BATTERIES
The NL510 / NL510G used nickel-hydrogen batteries that can be recharged.
Charging the battery is done by the AC adapter (included in standard) - Use the connector on
the front panel of laser level.
Charging process is indicated by illumination of the LED. When the LED lights up green, the
charging process is
completed
.
If it's necessary to replace the battery - battery compartment should be unscrewed.
Replacement batteries can be purchased from an authorized distributor.
Use lasers NL510 / NL510G with care, protect from moisture. Never put a wet instrument to the
transport box (wait until dry).
CONTROL PANEL
4
8
3
7
2
6
1
5
Description of buttons and functions:
1) On / off power and switch to manual mode
- Turns on and off
- Longer press of a button - approx. 6 seconds. (when the equipment is turned on) enables /
disables the manual mode. The equipment in manual mode can be tilted (beyond self-levelling)
or work in difficult terrain, near the heavy construction equipment (does not react to the
vibrations of the land). When the equipment is switched to manual mode, the display shows the
"hand" icon.
2) Adjusting the rotation speed of the head
- available head spin speeds: 0-60-120-300-600 rpm. Each press will switch speed. When
working on smaller distances, classic measurements - choose 300 rpm. When working on large
distances and with the cooperation of machine control systems, select 600 rpm. Keep in mind
that the faster the head rotates, the energy consumption is greater
3) Select the inclination in axis (X, Y)
- Use the button to select the direction of the inclination (X, Y). Plane can be tilted up to ±10%
4) laser inclination mode switch (device automatically switches to manual mode)
5) movement alarm mode (TILT)
- The laser is able to secure. While the device is moved, placed in another place (which can
cause incorrect measurements) – it turns off (system beeps). In such a situation, turn off and on
Summary of Contents for NL510
Page 16: ...16 ...
