10
7. Do not change the position of the laser and spin it 180°.
8. Mark the position of the laser beam on the paper sheet. Measure the distance
between the markers
9. If the distance between the markers is less than 3mm calibration is not necesery.
LASER SENSORS
Nivel System RD100
LCD Display
Precise mode Coarse mode
Too high,
the laser signal is below
(please Lower the sensor)
- you will hear a high frequency sound
You are in the right position
- you will hear a continuous sound
Too low,
the laser signal is above
- you will hear a high frequency sound
discharged batteries buzzer on / off
Sensor panel
LCD display
laser signal receiver
ON/OFF button
bracket
working mode of a sensor
buzzer
Nivel System RD500 DIGITAL, RD500G DIGITAL
Specification
-Detecting Range: 300m
-Unit of display: mm, inch, inch(fraction), cm
-Segments of indicator: 5+5
-3 x Accuracy of detecting
-±1mm
-±5mm
-±10mm
-Readable sensor range:±45mm
Summary of Contents for NL510
Page 16: ...16 ...
