Nitty-Gritty Inox mark, Manual

Page: 27 / 34

24
3. DANGERS AND GUARDS
3.1. Prohibited uses
The INOX MARK must be only be used for the purpose envisaged by the maker. (See chapter 2).
In particular, the system cannot used:
Without its guards and /or with its safety devices deactivated, out-of-order or missing;
Unless it has been correctly installed;
In environments where there is a risk of explosion or fires;
In dangerous conditions or when the machine is malfunctioning;
Improperly or by untrained personnel;
For uses not complying with the specific standard;
In the event of supply defects;
After unauthorised modifications;
Unless all instructions are observed;
With materials and tools differing from those envisaged by the maker.
IMPORTANT
Any deviation from the above mentioned specifications calls for a specific written
authorization by NITTY-GRITTY.
Any modification that has not to been authorized by the Marker, that alters the
functions of the machine and consequently modifies the risk and/or generates
additional ones, will be made at the exclusive responsibility of the person/company
marking that modification.
Should these modifications be made without the maker’s authorization, any
guarantee, and the declaration of conformity issued by the Maker in accordance to
Machine Directive 98/37/CE, will be invalidated.
3.1.1. Accident-prevention systems
The machine is extremely safe to use, since it handles neutral chemicals that do no call for any
particular operator qualification.
4. TRASPORT AND STORAGE
4.1. Transport
INOX MARK can be transported in its special case, featuring soft protective elements inside, for each
component. The machine must be in any case lifted and transported with care to prevent it falling or
overturning.
4.2. Storage
If you intend to store the machine for long periods of time, keep it in a covered environment, scheltered
from bad weather. The environment must be free from aggressive chemicals.
The machine must be kept in environments with a suitable temperature (from -10 to 40°C).