Nitty-Gritty Inox mark, Manual

Page: 24 / 34

21
B) Switch machine OFF before connecting ground cable to INOX MARK (Yellow cable in yellow plug).
C) Connect one side of black power cable on top of the handgrip, other side into black plug in front of
the machine.
D) Fix the pad to graphite insert using the o-ring as indicated on photos.
E) Connect the clamp of the ground cable to the workpiece.
F) Turn the selector of INOX MARK on the chosen position: AC position (alternate current) for darker
and bolder marks; DC position (direct current) for lighter marks. Set the machine main to ON.
G) Lean the template on workpiece, then put some drops of electrolyte solution on the pad and so pass
it on the template several time, without exit to the edge of the screen.