22
H) When marking is done recover the handgrip on its support.
I) Remove the felt pad used and clean the marked metal with a sponge or a wet cloth to bring out the
final.
WARNING:
After marking, it is necessary to rinse carefully the template with water in order to avoid salt
sediments from it.
2.3.1. Short-life silk-screens
As far as short-life screens are concerned, marking is thus effects:
A) Prepare the marking on the screen by writing on its white face;
B) Peel the screen off the white paper;
C) Apply the silk-screen on the metal to mark; pass the pad previously prepared, over the screen
thus positioned, several time.
D) Lift the screen and clean the metal with a sponge to bring out the final result.
Summary of Contents for Inox mark
