15
3.8 Steering handle
For assembling the steering handle, M6 screws beneath the steering handle shall be tightened.
Note:
The screws beneath the steering handle shall be forcibly and firmly tightened.
4. Maintenance
4.1 Check and replacement of lubricating oil
The lubricating oil level shall be monthly checked.
The machine oil stick is fixed at rear right top of engine crank box and the oil level shall be between the upper and lower mark of the oil stick.
At check, park the car on flat ground, take out and wipe dry the oil stick, insert the stick into the hole (not rotate the thread) and take out the stick again to check
the oil level (Shown in Fig.14).
As required, fill 15W/40SE grade gasoline engine lubricating oil to the mark.
After check or filling of gasoline engine lubricating oil, re-place and tightly screw the oil stick.
Notes:
. In order to avoid burning by silencer, the gasoline engine lubricating oil shall be checked under cold-car state.
. The lubricating oil shall be clean and free of foreign matters.
. Running under insufficient engine lubricating oil would result in wearing out of components.
. At re-placing, the oil stick shall be firmly tightened.
-Fig. 14-
-Fig. 15-
Summary of Contents for 110cc
