Nitro motors 110cc, Manual

Page: 12 / 33

12
2.2.8 Tire
Both the front and rear wheel use vacuum tire and at use the tires shall be inflated within the specified range of barometric pressure.
3. Guide to operation
3.1 Start of engine
3.1.1 Check and preparation before starting of engine:
a. Fill gasoline into the oil tank to the specified range.
b. The oil pipeline shall be in normal state.
Notes:
. At fueling, the gasoline shall not be dropped onto the surface of oil tank cover and the gasoline on the oil tank surface shall be wiped with cloth.
. The fueling shall be made in well-ventilated place as far as possible.
3.1.2 Start of engine
a. Insert the key into slot of ignition switch.
B. clockwise rotation of the key may turn on the power supply.
c. Ensure that the green neutral indicator lamp lights on; otherwise, adjust the engine at neutral state as per instruction indicated on its left cover
d. Turn off the switch of engine choke. (off state shown in Fig.10 and on-state shown in Fig.11)
e. Press ignition button (shown in Fig.7-8) to ignite the engine. Slightly press the accelerator pedal at right pedal (shown in Fig 4-16) to supply oil to the
engine.
f. The cold engine may be loaded after running for 2-3 minutes for warming.
-Fig. 10- -Fig. 11-