Nitro motors 110cc, Manual

Page: 10 / 33

10
2.2.2 Ignition switch
The position of ignition switch is shown in Fig. 7-7.
OFF: Denoting that the circuit is cut off, the engine at dead state and the key can be withdrawn.
(· ): Denoting that the circuit is in on-state, the engine may be started and the key is impossible to withdraw.
2.2.3 Indicator lamp
The positions of indicator lamps are shown in Fig. 7-1, 7-2, 7-3, 7-4, 7-5 and 7-6.
When ignition switch is on and the engine is at neutral position, the green indicator lamp 7-3 will light on. When engine is to be replenished, the orange indicator
lamp 7-1 will light on.
When the gear is at other positions, the neutral indicator lamp will light off and any of indicator lamps 7-2, 7-4, 7-5 and 7-6 will light on depending on the
transmission of the engine
2.2.4 Switch of head lamp and main-beam/dipped-beam headlamps
The position of front head lamp switch is shown in Fig. 7-12.
The positions for main-beam/dipped-beam headlamps switch are shown in Fig. 7-10.
In this car the front head lamp provides three types of light sources:
1
） Common lighting: Set the head lamp switch at position “ ”.
2
）
Dipped-beam
lamp: Set the head lamp switch at position “ ” and the main-beam/dipped-beam headlamps switch at position “ ”.
3
）
Main-beam
light: Set head lamp switch at position “ ” and the main-beam/dipped-beam headlamps switch at position “ ”.
2.2.5 Fuel and oil tank cover
The oil tank is fixed at left side of top of the car, as shown in Fig. 3-6.
The car should use over 90# gasoline.
For fueling or checking oil level, counterclockwise rotate oil tank cover.
After fueling or checking oil level, downwards press and clockwise rotate the oil tank cover.
Note: Before fueling, the oil pipeline shall be checked for sure connection.