eNBioAccess-T1 User Guide
19
(138-827) (Bangi-dong, Hyundai Topics Building) 4
th
Floor, Wiryeoseongdae-
ro, Songpa-gu, Seoul, Korea
Tel : 82-2-6488-3232 , Fax : 82-2-6488-3099,
E-Mail: [email protected]; http://www.nitgen.com
Node ID
Set the terminal ID to add to ACM Pro in the range of 1 to 2000.
Use DHCP
Set whether to use a static IP.
Terminal IP
Set the terminal IP.
Server IP
When the terminal is used in conjunction with Access Manager, set the server IP.
Subnet Mask
Set the subnet mask value of the terminal.
Gateway
Set the gateway value of the terminal.
Port No.
Set the Access Manager Server port to 2000-65535. (Default: 7332)
Network Timeout
Set the communication cycle time between the Access Manager server and the terminal to the
range of 2-20.
Time Synchronization
Set time of device to time of smart phone.
Firmware Version
The terminal firmware version and the BLE firmware version are displayed.
Initialize
All data except logs and user information are initialized.
Factory Initialization
Initialize the settings of the terminal as set at a factory.
※
The terminal is rebooted after saving the settings. Therefore, it is recommended to access the terminal
after the lapse of 30 to 60 seconds.
