Copyright © 2022 - www.niteforce.mobi
Set Includes
Dog GPS unit
Reflective Collar
ScrewDriver
Charging Cable
Activation Magnet
User Manual
SET UP THE COLLAR
INSERT THE SIM CARD AND CONNECT THE BATTERY POWER CABLE INSIDE THE UNIT
SIM / BATTERY / CHARGING
1.
Loosen both cover screws with the supplied screwdriver. Be careful not to lose the small mounting screws
2.
Insert the operator SIM card as shown above picture. HINT: To prevent the effects of any vibrations or bumps in the
terrain, insert a small piece of clear tape into backside of the SIM card to secure it in place against hard vibrations
>
NOTE! If you use a so-called "Pre-Paid" SIM card, be sure to activate it, for example, with your mobile phone (test call)
and always turn off the PIN code of the SIM card before inserting it
>
NOTE! Slow speed 2G data subscriptions work fine with the collar. Geolocation is default at 15-second intervals via a
GPRS connection
>
NOTE! For example, the device alerts you when the battery is low (less than 20%) as a text message, so it is a good
idea to have text message functions supported on the SIM when used with collar
3.
Before closing the cover, connect the battery cable to the power port shown on the circuit board
4.
Carefully tighten the screws on the device cover with the screwdriver provided, and check that the cover is securely
fastened. Be careful not to get the battery power cable caught during closing!
5.
With the SIM card in place, the battery cable connected and the cover is closed, you can now charge the collar with
the supplied charging cable. Use your own mobile phone charger. It takes about 4 hours to fully charge the battery
6.
The battery cable adapter connects to the charging port in one direction only. See figure:
