NS-WIR54GF
54M Wireless Router User Guide
- 41 -
To setup a virtual server entry:
1. Click
the
Add New button
. (pop-up Figure 4-28)
2. Select the service you want to use from the Common Service Port list. If the
Common
Service Port
list does not have the service that you want to use, type the number of the
service port or service port range in the
Service Port
box.
3. Type the IP Address of the computer in the
Server IP Address
box.
4. Select the protocol used for this application, either
TCP
or
UDP
, or
All
.
5. Select
the
Enable
checkbox to enable the virtual server.
6. Click
the
Save
button.
Figure 4-28 Add or Modify a Virtual Server Entry
)
Note:
It is possible that you have a computer or server that has more than one type of available service.
If so, select another service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disabled All
button to make all entries disabled.
Click the
Delete All
button to delete all entries
Click the
Next
button to go to the next page and Click the
Previous
button to return the previous
page.
