background image

 

                    

     

Type 5 Hardware Installation Manual

 

   

Page 14 of 15

 

any negligent act, omission or wilful misconduct by you or your officers, employees, subcontractors or agents in the use of the Software 
or Hardware;  
 
any defect in your installation of the Software or Hardware, or your use of the Software or Hardware; or 
 
your breach of the Terms. 
 
For the avoidance of doubt, this indemnity shall extend (without limitation) to any third party claims against us, any loss or damage to 
property, and any injury to, or death of, any person. 
 
8. UPDATES 
Nistune Developments may, from time to time, revise or update the Software or Hardware. In so doing, Nistune Developments incurs no 
obligation to furnish such revision or updates to you. 
 
9. WARRANTY 
The author of this Software has verified as best as possible that the main features and functions of the Software and Hardware work as 
described when used normally on compatible equipment. Due to the complexity of computer software, we can not guarantee that the 
software or documents do not contain errors or works without intermissions on any equipment and software configuration. To the extent 
permitted by law and except as set out in this Agreement, all express or implied warranties, guarantees and conditions relating to the 
Software and Hardware, however arising, are excluded.  
 
10. DISCLAIMER OF LIABILITY 
 
NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL NISTUNE DEVELOPMENTS BE LIABLE FOR ANY 
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, 
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY 
OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE OR HARDWARE, EVEN IF 
NISTUNE DEVELOPMENTS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
 
IN NO EVENT WILL NISTUNE DEVELOPMENTS BE LIABLE FOR ANY COMPUTER DAMAGE, VEHICLE DAMAGE, PERSONAL 
INJURY, DEATH, FINES, LAWSUITS, PROSECUTION, LOST PROFITS, LOST DATA, INCORRECT DATA, ENVIRONMENTAL 
DAMAGE, GOVERNMENT, LAW AND REGULATORY VIOLATIONS OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES 
THAT RESULT FROM USE OR INABILITY TO USE THE SOFTWARE OR HARDWARE 
 
THE SOFTWARE AND HARDWARE IS NOT INTENDED FOR USE IN OPERATION OF MOTOR VEHICLES AND/OR MACHINES 
WHERE THE USE, FAILURE OR MISUSE OF THE SOFTWARE OR HARDWARE COULD LEAD TO DEATH, PERSONAL INJURY OR 
PHYSICAL OR ENVIRONMENTAL DAMAGE AND OR VIOLATE ANY ENVIRONMENTAL, SAFETY, TRANSPORTATION OR OTHER 
LAWS OR REGULATIONS. 
 
IT IS THE USER’S RESPONSIBILITY TO OBTAIN ANY CERTIFICATION, RECERTIFICATION OR NEW CLASSIFICATIONS 
PERTAINING TO USE OF THE SOFTWARE AND HARDWARE. IF ANY WARRANTY OR CONDITION IS IMPLIED BY THE TRADE 
PRACTICES ACT 1974 (CTH) OR OTHER RELEVANT LEGISLATION WHICH MAY NOT BE EXCLUDED THEN OUR LIABILITY OF 
ANY BREACH OF SUCH AN IMPLIED WARRANTY IS LIMITED SOLELY TO THE RESUPPLY OF THE RELEVANT GOOD OR 
SERVICE OR PAYMENT TO YOU OF THE COST OF HAVING THE GOOD OR SERVICE PROVIDED AGAIN (AT OUR OPTION) . 
SOFTWARE AND HARDWARE INSTALLATION REMAINS THE SOLE RESPONSIBILITY OF THE VEHICLE OWNER. 
 
 
11. GENERAL  
This License is personal between you and Nistune Developments. It is not transferable except in accordance with this Agreement, and 
any attempt by you to rent, lease, sublicense, assign or transfer any of the rights, duties or obligations hereunder, is void. This 
Agreement and the conduct of the parties hereto shall be governed by the laws of  South Australia. 
 
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS 
AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT 
BETWEEN YOU AND NISTUNE DEVELOPMENTS WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR 
WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND NISTUNE DEVELOPMENTS RELATING TO THE 
SOFTWARE AND HARDWARE. 

 

 

Summary of Contents for Type 5
















Reviews: